EMCO Simplatroll type 14.458 Spring applied Fail Safe Electromagnetic DC brake is designed to perform holding as well as emergency stopping functions (Normally On), making it particularly well- suited for brake motor applications. These brakes are electromagnetically actuated with two friction surfaces on a single disc. The braking power is applied by means of compression springs. The braking torque is generated in the no power or in event of power failure condition. These brakes are having torque up to 5000 Nm. Brake are available in various version as per application. Special brake with micro switch, tacho mounting provision, centring flange etc. can be also supplied. Brake is also available for low temperature (-40°C) application. 

Emco Simplatroll Spring applied fail safe DC brake type / model is supplied in model such as 14.458.06, 14.458.08, 14.458.10, 14.458.12, 14.458.14, 14.458.16, 14.458.18, 14.458.20, 14.458.25 for different torque.

• Normally “ON” Brake. Torque up to 5000Nm
• Bore: Pilot or as ordered. Coil with ‘F’ class insulation
• Non asbestos friction linings on twin surfaces.
• Dead-man type manual hand release
• Tacho mounting provision possible
• Air-gap monitoring and motor protection possible through micro switch


• Spare Brake disc with liner (ROTOR), Coil, Rectifier (DC Converter) are supplied on request.

Applications: Brake motors, Cranes and Hoists, Elevators, Servo motors, Machine tools, Packaging Machines, Golf carts, Presses, Printing machinery, Steel Plants, Industrial washing machines, Tyre making machinery, Hospital beds, Robotics, Tower cranes, Goods lifts, Construction machinery, Coil winding machinery, X- Ray machines, Wheel chair, Wire drawing machinery, Battery operated electric vehicles, Textile machinery.

INTORQ BFK458 spring-applied brake
Torque range: 1.5 – 600 Nm
Electromagnetically released spring-applied brakes are used wherever masses in motion have to be decelerated as quickly as possible or where masses must be held in a defined position. The braking force is applied by tappet springs. Thus the braking torque generated by friction locking remains available in the deenergised status – even in the event of mains failure. The brake is released electromagnetically. 

Fields of application
Brake motors, Conveyors, Cranes, Storage technology, Industrial trucks, Wood working machines, Stage machinery, Vehicles for the disabled, Automation technology, Controlled drives, Gate drives, Escalators. 

INTORQ Brake Model / Type BFK 458.06 E, BFK 458.08 E, BFK 458.10 E, BFK 458.12 E, BFK 458.14 E, BFK 458.16 E, BFK 458.18 E, BFK 458.20 E, BFK 458.25 E 

• Torque transmission
• Designed for dry running

• A powerful and complete range
• 9 sizes
• Standard voltages [V DC] 24, 96, 103, 170,180, 190, 205
• Graduated torque range from 1.5 - 600 Nm
• Enclosure according to IP00 ... IP55, depending on the special operating conditions

• Options
• Hand release for all sizes, both directions can be used for release and mounting (exception: tacho brake)
• Noise-reduced designs
• Various types of corrosion protection and enclosures
• Microswitches used to monitor air gap and wear (size 12 and above)
• Monitoring of Hand release function
• Non-standard voltages and bores on request
• Pulse width modulation (PWM), sizes 06 – 18 Partial discharge free brake has been developed for operation with the pulse width modulated DC bus voltage of a frequency inverter Rated coil voltage UN=103V DC

• Quick and easy mounting
• Preset air gap
• Special machining of the friction surfaces ensures that the rated torques are achieved after very few switching operations
• No locating bearing is required on the brake

• Durable
• The insulation system to temperature class F (155°C) ensures that the winding has a long service life
• The brakes are designed for 100% duty time (current applied to the brake)

• Low maintenance
• Long rotor/hub connection with low rate of wear and a tried-and-tested involute gear
• Asbestos-free and solvent-free friction lining with low rate of wear

• Long Life design BFK458-L
• Armature plate with low backlash and reinforced torque support
• Tappet springs with guide pins for protection against shearing forces
• Aluminium rotor with toothed intermediate ring: friction lining and tooth system with low rates of wear.

• CCV (Cold Climate Version), temperature resistant up to -40˚C
• CCV design configurable for all sizes in the modular system
• Use of chrome-plated friction surfaces (armature plate and flange)
• Use of temperature-resistant fixing screws is essential

• The following components are also approved for use up to -40˚C
• Rotor with sleeve (noise-reduced)
• Hand release
• Terminal box
• Microswitch
• Caps E and N


• Shaft sealing rings (available on request)

POWERMECH offers complete range of EMCO Spring applied Fail Safe Electromagnetic DC brakes Type / Model 14.458. 

• Normally “ON” Brake. Torque up to 5000Nm
• Bore: Pilot or as ordered. Coil with ‘F’ class insulation
• Non-asbestos friction linings on twin surfaces.
• Dead-man type manual hand release

POWERMECH offers TEMPORITI DC operated electromagnetic spring applied fail-safe brakes Type K.

These are made with Italian collaboration and design of Temporiti srl. Temporiti DC operated electromagnetic spring applied fail-safe Type K brakes are normally “ON” type, which means the brake is always on and applied. When a DC voltage is applied to it, the brake releases, thus allowing the shaft on which it is mounted to rotate. In case of no voltage, the brake is applied immediately and the rotating shaft on which the brake is mounted is held immediately. This also forms a safety mechanism in which the load is stopped from being moved in case of no power.

This brake can be mounted either on the backside of an electric motor or on any other driven shaft which is to be braked. These can be supplied with four different optional attachments and in various sizes and capacities.

The general applications are in brake motors, crane hoists, material-handling equipments, CNS machines, packaging, textile and other machines and other varied applications.

• Salient Feature
• Strong Structure
• Quiet Operation (<70 dBA)
• Simple Assembly and Installation
• Good Heat Dissipation.
• Adjustable Torque.
• Optional Manual release and dust seal.
• Epoxy Resin Bonded Vibration Proof coil.
• Class “F” Insulation.
• Metal part rust protected.
• IP 64 Protection against dust and water sprinklings.

DC Electromagnetic Brake Model / Type DM or DBM 

DC Electro-magnetic shoe brakes are actuated by an energy stored in the compression spring and is released by a DC electromagnet. This brake is Fail-Safe and is Normally ON (applied). The DC magnet Coil, when energized releases the brake. 

This series of brakes are characterized by robust construction and design. These are specially suited for Steel Mills, EOT Cranes, Hoists and Elevators.

Electro-magnetic Disc type Spring Loaded DC Brake Type SLDC Brake 

• Normally “ON” Brake and gets released only when power is supplied.
• Standard DC Voltage: 24. On request: 42VDC, 110VDC & 190VDC.
• Torque range: 0.2 kg-m 25 kg-m
• Geared hub with pilot bore is included in supply.

Applications: in Hoists, Cranes, Conveyors, Eccentric and Power Press, where brake should remain applied when there is no power.Applications: in Hoists, Cranes, Conveyors, Eccentric and Power Press, where brake should remain applied when there is no power.

We are considered a reputed manufacturer and wholesaler of Electromagnetic Shoe Type Drum Brake DC Operated. With operating Lifting cranes, hoists, sugar mill machinery, rubber-mixing mills, centrifuges, winches, paper mills and textile machines are the major usage areas of the range. 

Features:
Demand less maintenance
Rugged in construction
Efficient performance

We are one of the distinguished manufacturers and suppliers of DC Electromagnetic Shoe BCH Brakes. Offered range is suitable for 100 Nm to 5420 Nm torque and drum diameter ranging from 8” to 30”. Widely demanded for heavy industrial & mill duty applications, hoists, cranes, elevator and other machines, these magnetic shoe brakes are widely appreciated among our precious patrons. 

Features:
Sturdy in construction
Longer service life
Regular performance

Specifications:
Epoxy filled Class F coil with sheet metal enclosure
Brake to suit drum dia: 8” to 30” Torque 100 Nm to 5420 Nm
Brake wheel / drum is supplied as an accessory to the brake
On request Manual release, Limit switch & Special epoxy paints

Consolidated Hoist Brake / CHPL Hoist Brake / SWIFT Hoist Brake suitable for Model: 052, E104, 102, E204, 202, E304, 302, E504, 502, E604, E7504, E1004, 2E1506 


Consolidated Hoist Brake / CHPL Hoist / SWIFT Hoist Brake

POWERMECH supply AC Solenoid Operated Electromagnetic Brake type suitable for CHPL SWIFT Hoist / SWIFT Hoist Brake / Consolidated Hoist Brake suitable for Hoist Model: 052, E104, 102, E204, 202, E304, 302, E504, 502, E604, E7504, E1004, 2E1506.

• Brake to suit drum diameter: 4 inches (100mm), 5.5 inches (140mm) & 7 inches (180mm).
• Brake coil (Continuous or Intermittent) class ‘F’ Insulation.
• The Standard coils are 110, 220 & 415VAC, 50 Hz.
• Spare brake coil and with plunger, brake shoe with lining are also supplied on request.
• Brake drum or brake drum with coupling is supplied as an accessory to the brake.

• Standard Voltage is 110 VDC. Other voltage 24VDC, 42VDC etc is supplied on request.
• Brake Model DCCH-13, DCCH-15, DCCH-17, and DCCH-19 are supplied without mounting hole.
• Brake Mounting plate for Model DCCH-23 is drilled to suit CHPL Hoist Motor Frame.
• Spare Brake disc with liner, Gear hub and Magnet body can be supplied on request.